Canadian Quality Control Inc. 

Drill Bits

CQC has a collection of Drill Bits up to 36" in diameters and greater

TH-75-E Ingersoll Rand

The TH75E is a multipurpose hydraulic top head drive, truck-mounted, deck engine-powered drill rig, designed primarily for reverse circulation exploration applications using either rotary or downhole hammer drilling but is also capable of coring and conventional drilling. The TH75E employs a ‘dump angle derrick’ for angle exploration drilling. This ‘dump angle derrick’ can be positioned at any angle between vertical and 45 degrees using the derrick raising cylinders. The derrick then slides down

20W Series II

Our 20W Series II Bucyrus Cable tool drill is ready for all your Water Well Rehab jobs and Pump Re & Re systems as well as

Drill Subs

CQC boasts a collection of over 300 drill subs available for use

TH60

Pullback options – 40,000 lbf - Pull down – 25,000 lbf - Drill Depth 1320 Feet - Drill Feed Rate: 20 ft. /min - Fast Feed Up/Down: 150 ft./min - Derrick Capacity: 45,000 lb - Head Travel: 27 ft. 1050 CFM Compressor

22W Cable Tool

T800 22W Drill with T800 Deck Truck

This totally rebuilt and modified 22W is capable to drilling wells 20" in diameter and repairing wells up to 1200 feet in depth

City of Ft St John

City of Ft St John 2017 Well Screen Repairs

Senior Driller

Denis Caron Professional Driller

T800

Hauling Mini Excavator

Trouble Shooting

CQC was called in to assess design a water filtration system for a water well we had drilled earlier that year. After a few site visits and testing we were able to design the perfect system that meet our clients needs.With the help of local water filtration specialists we meet the Clients regulatory requirments

Well Screen Inspection

CQC prided its self in having the latest equipment to investigate wells. these cameras can be used to inspect well casing integrity, screens for biofouling/damages or broken casing

F2000 Flow Meter

CQC has a full inventory of Calibrated flow meters capable to testing flows from .5 of a gallon to 500 gallons. Larger testing equipment can be made available upon request. Flow maters can bee made available for rent also

City of Ft St John

2017 Well Screen Repairs

22W Drill & Deck truck

Our 22W is capable of drilling water wells up to 16 inch in diameter, Install Pumps up to 1200 feet deep, perform Pump testing and full Water Well Rehabilitation

Submersible Pumps

CQC has a large inventory of submersible pumps available, we boast an impressive assortment of pump capacities from 1GPM to 1600 GPM

Inspection Camera

1000 foot / 300 Meter Water Well Inspection Camera. System provides live recording in color and has a rotating 360 degree head Available in both day rates and weekly rates with operator.

CQC 853 Bob Cat

CQC has several Bob Cats for site support you'll find our Bob Cats on sites to assist with staging and safety

853 Bob Cat

Bob cats are used to stage our work sites

20W Series II

Our 20W is an environmentally friendly method for well repairs

22W 2017 CFS John Screen Repairs

20 W Series II

This small and compact drill can repair most of your tight work areas

22W Cable Tool

125 Kilowatt Generator

125 Kilowatt Generator for all your pump testing needs

Well Inspection

New Internal Well Inspection is one of the special services we offer<br/>

TH-60

Pullback options – 40,000 lbs - Pull down – 25,000 lbs - Drill Depth 1320 Feet - Drill Feed Rate: 20 ft. /min - Fast Feed Up/Down: 150 ft./min - Derrick Capacity: 45,000 lbs - Head Travel: 27 ft. 1050 CFM Compressor

Commercial Work Site

Water Well Inspections

16" to 20" Centralizers

16&quot; to 20&quot; Centralizers being installed

24" Stainless Steel Well Screen

24&quot; Stainless Steel Well Screen being removed from a Water Well for repairs

Casing Jacks 200 Ton

For Installation of Well Screens and Decommissioning of water wells

20W Series II

For all your hard to get into places here is our 20W its tiny

20W Series II

Ready for all your water well needs, this comes equipped with all your water well needs

Internal Well Corrosion

Your seeing internal well corrosion caused by time and a lack of well servicing

TH-60

Pullback options – 40,000 lbf - Pull down – 25,000 lbf - Drill Depth 1320 Feet - Drill Feed Rate: 20 ft. /min - Fast Feed Up/Down: 150 ft./min - Derrick Capacity: 45,000 lb - Head Travel: 27 ft. 1050 CFM Compressor.

DM-45

DM45 (Blast Hole Drill)a crawler-mounted, hydraulic tophead-drive rig that is suitable for a variety of multi-pass rotary and DTH drilling applications. Featuring a 30 ft (9.1 m) drill pipe change and a standard 5-rod carousel. With one rod under the rotary head, these units have a total clean depth capacity of 175 ft (53.3 m). Pulldown of up to 45,000. Utilizing a V12 diesel engine to drive the air compressor and hydraulic system. The powerful rotary tricone and DTH

Deck Truck

Deck Truck caring Core Boxes

Deck Truck

Moving Lock Blocks

Skid Steer

Site Support Skid Steer

Down the Hole Hammers

DTH for all your Drilling needs a have over 30 TDH up to sizes of 16&quot; and greater

Mini Excavator

Excavators for assisting the drill

Drill Subs

CQC boasts a collection of over 300 drill subs available for use

Drill Subs

CQC boasts a collection of over 300 drill subs available for use